Alumilite Clear Casting Resin 16 OZ
Alumilite Clear Casting Resin 16 OZ
SKU- Part Number - 10040
Alumilite Clear
Alumilite Clear is a crystal clear resin that is easy to use and great for a wide variety of clear casting applications. Its low viscosity and 1:1 mix ratio by weight makes it extremely easy to use. Vacuum or pressure is recommended to achieve 100% bubble free castings but minimal bubbles can be achieved by slowly mixing and pouring the resin. It offers superior polishability than other clear resins and able to achieve maximum shine in your finished parts.
Alumilite Clear must be mixed 1:1 by weight. Off ratio mixing may produce hazy or frosted parts.
Use Alumidust powders in combination with Alumilite casting resins or Alumisol to achieve beautiful effects in your casting project. Use Alumidust sparingly as a small amount goes a long way. Alumidust is non toxic and can be brushed into the mold or added to your casting material. To achieve the brightest look, brush the powder into a high gloss silicone rubber mold. The higher the gloss the brighter the look.
Alumilite casting is a process where the Part A & B resins are measured out by weight and mixed together. The resin mixture can then be left clear or dyes and pigments can be added. Once the resins are mixed, a molecular reaction starts and the mixture begins to generate heat. The heat that is created when resins are mixed together is known as thermosetting.
Itâs very important to make sure that you follow the manufacturerâs directions for mixing resins. Once the resins, dyes and pigments are mixed, the mixture is then added to a mold. The mold either contains a casting object or the mold is shaped to suit the final project. When the addition of the resin is complete, the casting is allowed to cure.
<>