Alumilite Dye Blue 1 OZ (1) Bottle RM

Alumilite Products

$6.45 
SKU: 30501

Alumilite Dye Blue 1 OZ (1) Bottle RM

SKU- Part Number - 30501

Alumilite Dye Use Alumilite’s Dyes to color your casting resin. Can be used in the water clear resin to make a translucent colored casting. The dyes are added to the “A” side by weight up to 5%. Use the Flesh tones according to your preference of shade (flesh tones are typically used in Alumilite White to achieve the best results). NOTE: 1 oz. bottle dispensing tip must be cut to dispense dye. Tip may also be removed completely.


Use Alumidust powders in combination with Alumilite casting resins or Alumisol to achieve beautiful effects in your casting project. Use Alumidust sparingly as a small amount goes a long way. Alumidust is non toxic and can be brushed into the mold or added to your casting material. To achieve the brightest look, brush the powder into a high gloss silicone rubber mold. The higher the gloss the brighter the look.

Alumilite casting is a process where the Part A & B resins are measured out by weight and mixed together. The resin mixture can then be left clear or dyes and pigments can be added. Once the resins are mixed, a molecular reaction starts and the mixture begins to generate heat. The heat that is created when resins are mixed together is known as thermosetting.

It’s very important to make sure that you follow the manufacturer’s directions for mixing resins. Once the resins, dyes and pigments are mixed, the mixture is then added to a mold. The mold either contains a casting object or the mold is shaped to suit the final project. When the addition of the resin is complete, the casting is allowed to cure.




<>